CCNA MCQ Questions

CCNA MCQ Questions | Freshers & Experienced

  • Satyam Jaiswal
  • 18th May, 2021

We are introducing here the best CCNA MCQ Questions, which are very popular & asked various times. This Quiz contains the best 25+ CCNA MCQ with Answers, which cover the important topics of CCNA so that, you can perform best in CCNA exams, interviews, and placement activities.

CCNA MCQ Questions and Answers

1) CCNA stands for _________.

  • A. Cisco Certified Network Assertion
  • B.Cisco Certified Network Associate
  • C.Cisco Certified Network Association
  • D.Cisco Certified Network Array

2) The CCNA certification validates your skills and knowledge in ____________.

  • A. network fundamentals
  • B.network access
  • C.IP connectivity
  • D.All of the above

3) CCNA is associated with _________.

  • A. Google
  • B.Cisco
  • C.Microsoft
  • D.IBM

4) _______ are the address that always uses the EUI-64 addressing mechanism.

  • A. Anycast addresses
  • B.Global unicast addresses
  • C.Link-local addresses
  • D.None of the above

5) __________ allows for a one-to-closest address for IP services.

  • A. Multicast address
  • B.Anycast address
  • C.Unicast address
  • D.D.Loopback address

6) __________ command is used to find the joined multicast groups for an IPv6 interface.

  • A. Router# show ipv6 interface gi 0/1
  • B.Router# show mutlicast
  • C.Router# show ipv6 routes
  • D.All of the above

7) __________ is similar to IPv4 RFC 1918 addresses.

  • A. Link-local addresses
  • B.Anycast addresses
  • C.Both A and B
  • D.None of the above

8) For global unicast addresses, _______ part of the address is allotted by the RIR, or Regional Internet Registry

  • A. First 13 bits
  • B.First 23 bits
  • C.First 33 bits
  • D.First 28 bits

9) What is the maximum length of a stacking cable for switch stacks?

  • A. 2 meters
  • B.3 meters
  • C.5 meters
  • D.6 meters

10) ________ type in a switch stack downloads it configuration, forwarding table,and ACLs.

  • A. Master switch
  • B..Topology switch
  • C.Subordinate switch
  • D.None of the above

11) _________ in a stack is responsible for forwarding tables and the central ACL.

  • A. Master switch
  • B.Slave switch
  • C.Subordinate switch
  • D.All of the above

12) How does traffic flow on the StackWise 3750 platform?

  • A. Counter rotation paths at 32 Gb/s each
  • B.Counter rotation paths at 16 Gb/s each
  • C.Directionally at 32 Gb/s
  • D.None of the above

13) _________ is the supported maximum number of 3750 switches that can stacked.

  • A. 5 switches
  • B.7 switches
  • C.9 switches
  • D.11 switches

14) _______ protocol will support IPv6 for RIP.

  • A. RIPv1
  • B.RIPv6
  • C.RIPng
  • D.None of the above

15) The default number of routes that RIPv2 will load balance is a total of _____.

  • A. 5
  • B.7
  • C.4
  • D.2

16) When should QoS shaping be implemented?

  • A. When the service provider is policing traffic
  • B.When WAN applications require a minimum bit rate
  • C.Both A and B
  • D.None of the above

17) When should QoS policing be implemented?

  • A. To help police WAN applications
  • B.To help police LAN applications
  • C.To maintain a contracted CIR
  • D.None of the above

18) _______ method helps combat queue starvation for QoS queuing.

  • A. LLQ
  • B.Policing
  • C.CBWFQ
  • D.Policing

19) ________ is the recommended maximum delay VoIP traffic should not exceed.

  • A. 170 ms
  • B.150 ms
  • C.90 ms
  • D.70 ms

20) Which protocol and port does NTP use for time synchronization?

  • A. TCP/9
  • B.TCP/123
  • C.UDP/12
  • D.UDP/123

21) Which protocol helps synchronize time for routers and switches?

  • A. ICMP
  • B.SNMP
  • C.NTP/li>
  • D.None of the above

22) Which command will wipe out all current NAT translations in the NAT table?

  • A. Router#clear ip nat translation *
  • B.Router#clear ip nat translation
  • C.Both A and B
  • D.None of the above

23) _________ protocol will encrypt the entire packet from the switch or router to the AAA server?

  • A. TACACS
  • B.RADIUS
  • C.TACACS+
  • D.None of the above

24) __________ port and protocol does TACACS+ use.

  • A. TCP/74
  • B.UDP/49
  • C.UDP/74
  • D.TCP/49

25) RADIUS authentication use ________ protocol and port.

  • A. UDP/1845
  • B.UDP/1645
  • C.UDP/1745
  • D.None of the above

26) What is the default encryption method for passwords, when you configure a line password?

  • A. Clear text
  • B.SHA-128
  • C.SHA-256
  • D.None of the above

27) A routing protocol perform ____________ on network plane.

  • A. Data plane
  • B.Routing plane
  • C.Control plane
  • D.All of the above

28) _________ protocol is normally used with REST APIs.

  • A. SOAP
  • B.SNTP
  • C.SNMP
  • D.HTTP

29) _________ network plane is used for Spanning Tree Protocol (STP)

  • A. Switch plane
  • B.Management plane
  • C.Data plane
  • D.Control plane

30) _______ security method does SNMP version 2c employ.

  • A. Community strings
  • B.Encryption
  • C.Both A and B
  • D.None of the above

Leave A Comment :

Valid name is required.

Valid name is required.

Valid email id is required.